Terms : Hide Images
| 2048791124 | Who shall designate, in writing, a R&S Petty Officer? | CO/OIC | 0 | |
| 2048792296 | T/F: As the R&S PO, are you required to personally inspect and maintain all equipment? | NO/False | 1 | |
| 2048792773 | List the eight types of inspections that may be conducted on R&S gear. | W-Weekly, M-Monthly, Q-Quarterly, S-Semi Annually, A-Annually, P-Post Use, O-Other, MX-Maintenance only activities | 2 | |
| 2048794739 | What are the two versions of the Stokes Litter? | Two Piece, Rigid | 3 | |
| 2048795334 | T/F: Structural Repairs to the litter frame are authorized at the unit level. | False | 4 | |
| 2048795788 | Maintenance on the lift raft is limited to? | Cleaning the exterior | 5 | |
| 2048796533 | Life rafts beyond the 1-year acceptance shall be removed how frequently for servicing? | Annually | 6 | |
| 2048797394 | Anti Exposure Coveralls provide how many pounds of buoyancy? | 22lb-45lb | 7 | |
| 2048797913 | What form is used in the Coast Guard to document personal issue items? | AF Form 538 | 8 | |
| 2048798752 | What are the appropriate inspections for the following? 1. Personal Marker Light 2. Strobe Light 3. Whistle | 1. PML- Three years from date of manufacture will elapse within the next 180 days, replace. 2. Strobe Light- Check the security of the hook tape. Repair or replace if required. 3. Whistle- Inspect for seam separation and cracks. | 9 | |
| 2048805427 | What is used to lubricate dry suit seals? | Talcum Powder | 10 | |
| 2048806533 | What is the minimum required survival gear to be attached, when the boat crew survival vest is worn with the type I and III PFD's? | PML or Strobe Light and a whistle | 11 | |
| 2048807587 | The Strobe Light is attached to the type I or III PFD using what length of line. | 36in | 12 | |
| 2048810110 | List the seven items that are carried in the Boat Crew Survival vest? | MK-124 MK-79 Strobe Light Signal Mirror Whistle PLB Survival Knife | 13 | |
| 2048812293 | What know is used with the MK-124 Smoke Illumination signal? | Surgeon's know | 14 | |
| 2048812762 | What do you record of the pyrotechnics on the boat crew survival vest maintenance log? | Lot Numbers | 15 | |
| 2048813165 | All installed pyrotechnics should be condition code? | Alpha or Charlie | 16 | |
| 2048813687 | What type of retro-reflective tape shall be used on a life ring? | Type II material that is approved under 46CFR 164.018 | 17 | |
| 2048814602 | What is stenciled on the ring buoy's lower semi-circle? | U.S. Coast Guard | 18 | |
| 2048815266 | The floating electric marker light is designated to operate for a minimum continuous duration of...........? | 36 Hours | 19 | |
| 2048815680 | During what inspection period do you install a new battery in the floating marker light? | Semi-Annual | 20 | |
| 2048816025 | How long is the line for the rescue line-throw bag? | 75ft | 21 | |
| 2048816987 | What is the purpose of the wildcat? | To control the anchor chain. | 22 | |
| 2048817461 | The gypsy head is often mounted on the anchor windlass outboard of the what? | Wildcat | 23 | |
| 2048818056 | The gypsy head is used to handle what when mooring or warping the ship? | Lines | 24 | |
| 2048818799 | The gypsy head working surface is coated with what? | Inorganic Zinc | 25 | |
| 2048820165 | The anchor windlass .......... is used to control the free-fall of the anchor and chain. | Brake | 26 | |
| 2048820865 | The ......... ......... is used to control the windlass brake. | Brake Wheel | 27 | |
| 2048821691 | The windlass brake should be kept free of ........ foreign matter and ......... and .......... | Dirt, Grease, Oil | 28 | |
| 2048822855 | The cat's paw serves as a ......... .......... used if an emergency occurs while raising the anchor. | Safety Device | 29 | |
| 2048823626 | The cat's paw should be inspected for ...... and ease of ........ | Cracks, Movement | 30 | |
| 2048824320 | The anchor should be inspected for free movement between the ......... and ......... | Shank, Flukes | 31 | |
| 2048825173 | The anchor shank should be visually inspected for ........ and ....... | Bending, Twisting | 32 | |
| 2048826022 | The second to last shot of anchor chain is painted what color? | Yellow | 33 | |
| 2048826229 | The last shot of anchor chain is painted what color? | Red | 34 | |
| 2048826482 | The swivel is used to eliminate ......... of the anchor chain. | Twisting | 35 | |
| 2048827277 | When inspecting the swivel, ensure it ........... freely. | Rotates | 36 | |
| 2048827989 | Excessive rust on the swivel may be removed by what? | Sandblasting | 37 | |
| 2048829537 | The detachable link come as a ......... set and can not be ......... | Matched, Interchanged | 38 | |
| 2048830497 | The pear shaped detachable link is used to connect the first link of the outboard swivel shot to the ............ .............. | Anchor Shackle | 39 | |
| 2048831707 | A detachable link must be replaced if (three reasons)? | Twisted, Cracked, and or elongated beyond maximum limits. | 40 | |
| 2048834303 | The pelican hook should be inspected quarterly for (four reasons)? | Cracks, Deformation, ease of operation, excessive wear | 41 | |
| 2048835132 | When inspecting the turnbuckle and it does not turn freely, you should............ and .............. the threads. | Clean and Lubricate | 42 | |
| 2048835687 | What two NSTM's shall be referenced when performing maintenance on a ships towing gear? | 1. Naval Ship's Technical Manual CH-582 Part 2 2. Navy Ships Technical Manual CH-613, Wire and Fiber Rope and Rigging | 43 | |
| 2048837201 | The ......... provides a description of the cutter's towing equipment. | Allowance Equipage List (AEL) | 44 | |
| 2048840494 | .......... can lower the line strength by as much as 40% | Rust | 45 | |
| 2048845529 | If there is any doubt of equipment serviceability, the equipment should be ............. | Replaced | 46 | |
| 2048846287 | The .............. is a towline that is five inches in circumference or greater. | Tow line hauser | 47 | |
| 2048847439 | List seven damage indications to look for when inspecting a towline. | 1. Cuts 2. Fiber damage and wear 3. Chafing 4. Flattening/Elongation 5. Hardening 6. Snags 7. Flushing | 48 | |
| 2048850215 | Internal inspections of wire ropes ............... be performed on a routine basis. | Shall Not | 49 | |
| 2048859587 | Wire rope needs to be replaced when one broken wire is found within .......... of any end fitting. | One rope lay length | 50 | |
| 2048860281 | When inspecting a tow reel, you should be looking for .......... and .......... | Corrosion and Pitting | 51 | |
| 2048861385 | When a line runs over sharp edges or rough surfaces ..........shall be used. | Chafing Gear | 52 | |
| 2048862196 | Before coiling a line on a drum or reel after it has been put under load, allow .............. | Plenty of time for the line to recover its original length. | 53 | |
| 2048864123 | Documentation of the towing hawser condition is required upon receipt of a new rope, .............. and after every operation. | When it is used in a operation | 54 | |
| 2048867762 | The ........ (s) provide a description of the cutter's mooring line inspection guidelines for the WMEC's. | MPC | 55 | |
| 2048876034 | Level I weight-handling equipment inspections are normally conducted in accordance with Naval Engineering Manual COMDTINST M9000.6 (series), as directed by the Product Line Manager, or ............... (which takes precedence) | MPC's | 56 | |
| 2048879328 | Dynamic weight testing shall be performed on all cranes (except 240ft WLBB, 225ft WLB and 175ft WML classes) as part level ......., level ...... and level ...... inspections. | I, II, III | 57 | |
| 2048880937 | Dynamic weight testing shall be performed on all cranes; whenever ............. replacements are made, affected components shall be re-tested IAC with applicable portions of the test procedure. | Major Equipment | 58 | |
| 2048881644 | What type of weight testing shall be performed on all cranes prior to any other test being done. | No Load Test | 59 | |
| 2048882373 | Dynamic load test is typically conducted at the ........... and at ........ % of the working load limit. | Pier, 125% | 60 | |
| 2048883451 | When conducting a dynamic load test, the load shall be held for at least ............. cycles must be completed, at no specific speed, without loss of............... | Three, Performance | 61 | |
| 2048885082 | When conducting a dynamic load test the load shall be held for at least ............ minutes on each individual lifting ring. | 10min | 62 | |
| 2048887342 | When conducting a dynamic load test, to prevent excessive damage in the event of equipment failure during test, ............. shall be placed under load tests and each load shall be kept as ........... ............... .............. as possible. | Dunnage, close to the deck | 63 | |
| 2048889032 | Engraved label plates shall be installed on cranes or crane pedestals to document the what? | WLL, Static Test Load, Dynamic Test Load and date of certification | 64 | |
| 2048892743 | Shore facilities boat hoisting equipment shall be load tested every ............., and prior to use after any ........... or .............. to the equipment, which affects the ability of the equipment to lift. | Two Years, Alteration or Repair | 65 | |
| 2048897109 | Shipboard boat handling hoisting equipment load tests shall be conducted ............, or after any ........ of hoisting fittings, slings, cranes, booms, or davits and falls that form a part of boat handling gear. | Annually, Modifications | 66 | |
| 2048898781 | In general, the test load, for boat davit or boat lifting gear, is equal t0 .............% of the normal hoisting load. | 150% | 67 | |
| 2048900676 | The boat, with test load, shall be lifted by its normal hoisting equipment and suspended for at least .......... minutes (just clear of the water) to minimize damage in the event of failure. | 10min | 68 | |
| 2048902052 | Replace wire rope if there are .........broken wires in one rope lay length or ........ wires in one strand lay length of weight-handling system or general-purpose wire. | Six, Three | 69 | |
| 2048933675 | When inspecting sheaves on booms and frame, electrical wiring and connections shall be inspected for .................. | Corrosion | 70 | |
| 2048933676 | The diameter of wire rope shall be measured in a circumscribing circle in ........... or ............ places. | Six or More | 71 | |
| 2048948085 | When documenting all of the weight testing results for Booms and Frames, where most everything be documented? | Registry of Lifting Appliances | 72 | |
| 2048951444 | During ........and ..........., paints and solvents can create atmospheres which are explosive, can create highly flammable mixtures, and can be highly toxic to applicants and nearby occupants. | Mixing; Applications | 73 | |
| 2049994477 | Ensure all personnel applying, mixing, or removing paint have read the product's ....... and are following recommendations. | MSDS's | 74 | |
| 2050005230 | As a minimum MSDS's shall provide information regarding ................., ..................., .................... | The hazards presented, Protective measures to be taken, Emergency first aid procedures to be followed for a hazardous material. | 75 | |
| 2050028638 | Flammable storage cabinets are double walled and floored with a ......... inch air space between inner and outer surfaces. | 1 1/2 inch | 76 | |
| 2050035893 | All hazardous materials received for use must be checked for labels or tags which, as a minimum, provide the following? | 1. Name of the material indicated on the MSDS 2. Warning of the principal hazards 3. Effects of overexposure on target body organs 4. Name, address of the manufacturer, supplier, or a responsible party whop can provide additional information. | 77 | |
| 2050054133 | The purpose of mixing and conditioning paint is to ............... and re-blend or re-disperse the pigment with the vehicle. | Allow the paint to reach ambient temperature. | 78 | |
| 2050061399 | Many surface contaminates reduce paint adhesion and cause what? | 1. Blistering 2. Peeling 3. Flaking 4. Under-film rusting | 79 | |
| 2050067304 | Any changes to increase the funds on the PR shall only be made by the who? | Funds Manager | 80 | |
| 2050078028 | When new products are proposed for addition to the unit Hazardous Material Inventory, the supervisor must acquire the MSDS so it can be evaluated when? | Before it is purchased. | 81 | |
| 2050081408 | Where is the Paint Record kept on small boats? | Boat Record | 82 | |
| 2050086024 | How many straps are on the Stokes Litter? | 5 | 83 | |
| 2050091327 | If the stokes litter is exposed to bodily fluids, what manual do you refer to for cleaning? | Medical Manual | 84 | |
| 2050098555 | If a boat sinks before the crew can manually launch the life raft, what depth will the hydrostatic release automatically separate? | 5 - 15 feet | 85 | |
| 2050107740 | If sea conditions are unknown, personnel shall be prepared for the most adverse conditions by selecting the inherently buoyant Coast Guard approved type ...... PFD. | Type I | 86 | |
| 2050115972 | The Boat Crew Survival Vest is worn over a Type III Coast Guard approved PFD, as well as what? | Anti Exposure Coveralls, Float Coat, Type I PFD | 87 | |
| 2050125040 | Cutters less than 179 feet may size the tending line of the Cutter Swimmer Harness to how many times the length of the cutter. | 3 times | 88 | |
| 2050130127 | The second component of an MPC card denotes the what? | Frequency | 89 | |
| 2050135890 | The underside of the cat's paw should remain what? | Unpainted | 90 | |
| 2050140910 | How often shall anchors be lowered until two shots remain onboard, to ensure the anchor is free for running? | Semi-Annually | 91 | |
| 2050146901 | What manual will you find the correct diameter for anchor chain parameters or replacement? | NSTM 581 | 92 | |
| 2050152639 | What is the color of the detachable link on the 6th shot of anchor chain? | Blue | 93 | |
| 2050155202 | How often should the chain appendages on the anchor chain be inspected? | Quarterly | 94 | |
| 2050159295 | Towing hawsers on cutters are made from how many feet of double braided nylon? | 900 feet | 95 | |
| 2050166554 | Replace the wire rope is there is how many broken wires within one rope lay length of any end fitting? | One | 96 | |
| 2050170714 | Documentation of the towing hawser is required upon what? | 1. Receipt of a new rope 2. When damage is detected 3. After each inspection | 97 | |
| 2050177852 | Rust stains can lower line strength by as much as what? | 40% | 98 | |
| 2050181124 | Inspect a hawser every how many inches when doing line inspections? | 12 inches | 99 | |
| 2050185669 | If a hawser is suspected of being shock loaded, what should be done? | Replace immediately | 100 | |
| 2050193692 | A dynamic load test is typically conducted at the pier at how much of a working load limit? | 125% | 101 | |
| 2050198678 | A static load test is typically conducted at the pier at how much of a working load limit? | 200% | 102 | |
| 2050202101 | Which inspection is most comprehensive requiring disassembly and overhaul? | Level 3 | 103 | |
| 2050207609 | The procedures for the different type of surface preparations can be found in what manual? | COMDTINST M10360.3 | 104 | |
| 2050216019 | For safety concerns when painting confined spaces on board a cutter refer to what manual? | COMDTINST M9000.6 | 105 | |
| 2050222597 | National Fire Code Number what governs the storage of paint, thinners, and solvents? | 30 | 106 | |
| 2050224640 | What does DFT stand for? | Dried Film Thickness | 107 | |
| 2050233982 | The primary means of communicating the hazards of workplace materials are what which must be accessible to personnel in their workspace? | MSDS's | 108 | |
| 2050240121 | Before using a product, personnel shall review what and respective MSDS's? | Container Warning Labels | 109 | |
| 2050249777 | A hazardous material inventory list must include all of the following except what? | Date of purchase | 110 | |
| 2050255077 | Each certified PR must contain two signatures; one by a who and one by the funds manger? | Authorized Requisitioner | 111 |
